Making new layers and models via subclassing

Introduction

This guide will cover everything you need to know to build your own subclassed layers and models. In particular, you’ll learn about the following features:

• The Layer class
• The add_weight() method
• Trainable and non-trainable weights
• The build() method
• Making sure your layers can be used with any backend
• The add_loss() method
• The training argument in call()
• The mask argument in call()
• Making sure your layers can be serialized

Let’s dive in.

Setup

library(keras3)
library(tensorflow, exclude = c("set_random_seed", "shape"))
library(tfdatasets, exclude = "shape")

The Layer class: the combination of state (weights) and some computation

One of the central abstractions in Keras is the Layer class. A layer encapsulates both a state (the layer’s “weights”) and a transformation from inputs to outputs (a “call”, the layer’s forward pass).

Here’s a densely-connected layer. It has two state variables: the variables w and b.

layer_linear <- Layer("Linear",

  initialize = function(units = 32, input_dim = 32, ...) {
    super$initialize(...)
    self$w <- self$add_weight(
      shape = shape(input_dim, units),
      initializer = "random_normal",
      trainable = TRUE
    )
    self$b <- self$add_weight(
      shape = shape(units),
      initializer = "zeros",
      trainable = TRUE
    )
  },

  call = function(inputs) {
    op_matmul(inputs, self$w) + self$b
  }
)

You would use a layer by calling it on some tensor input(s), much like an R function.

x <- op_ones(c(2, 2))
linear_layer <- layer_linear(units = 4, input_dim = 2)
y <- linear_layer(x)
print(y)

## tf.Tensor(
## [[0.02153057 0.15450525 0.0205495  0.04493225]
##  [0.02153057 0.15450525 0.0205495  0.04493225]], shape=(2, 4), dtype=float32)

Note that the weights w and b are automatically tracked by the layer upon being set as layer attributes:

linear_layer$weights

## [[1]]
## <KerasVariable shape=(2, 4), dtype=float32, path=linear/variable>
##
## [[2]]
## <KerasVariable shape=(4), dtype=float32, path=linear/variable_1>

Layers can have non-trainable weights

Besides trainable weights, you can add non-trainable weights to a layer as well. Such weights are meant not to be taken into account during backpropagation, when you are training the layer.

Here’s how to add and use a non-trainable weight:

layer_compute_sum <- Layer(
  "ComputeSum",
  initialize = function(input_dim) {
    super$initialize()
    self$total <- self$add_weight(
      initializer = "zeros",
      shape = shape(input_dim),
      trainable = FALSE
    )
  },
  call = function(inputs) {
    self$total$assign_add(op_sum(inputs, axis = 1))
    self$total
  }
)

x <- op_ones(c(2, 2))
my_sum <- layer_compute_sum(input_dim = 2)
y <- my_sum(x)
print(as.array(y))

## [1] 2 2

y <- my_sum(x)
print(as.array(y))

## [1] 4 4

It’s part of layer$weights, but it gets categorized as a non-trainable weight:

cat("weights:", length(my_sum$weights))

## weights: 1

cat("non-trainable weights:", length(my_sum$non_trainable_weights))

## non-trainable weights: 1

# It's not included in the trainable weights:
cat("trainable_weights:", length(my_sum$trainable_weights))

## trainable_weights: 0

Best practice: deferring weight creation until the shape of the inputs is known

Our Linear layer above took an input_dim argument that was used to compute the shape of the weights w and b in initialize():

layer_linear <- Layer("Linear",

  initialize = function(units = 32, input_dim = 32, ...) {
    super$initialize(...)
    self$w <- self$add_weight(
      shape = shape(input_dim, units),
      initializer = "random_normal",
      trainable = TRUE
    )
    self$b <- self$add_weight(
      shape = shape(units),
      initializer = "zeros",
      trainable = TRUE
    )
  },

  call = function(inputs) {
    op_matmul(inputs, self$w) + self$b
  }
)

In many cases, you may not know in advance the size of your inputs, and you would like to lazily create weights when that value becomes known, some time after instantiating the layer.

In the Keras API, we recommend creating layer weights in the build(self, inputs_shape) method of your layer. Like this:

layer_linear <- Layer(
  "Linear",
  initialize = function(units = 32, ...) {
    self$units <- as.integer(units)
    super$initialize(...)
  },
  build = function(input_shape) {
    self$w <- self$add_weight(
      shape = shape(tail(input_shape, 1), self$units),
      initializer = "random_normal",
      trainable = TRUE
    )
    self$b <- self$add_weight(
      shape = shape(self$units),
      initializer = "zeros",
      trainable = TRUE
    )
  },
  call = function(inputs) {
    op_matmul(inputs, self$w) + self$b
  }
)

The call() method of your layer will automatically run build the first time it is called. You now have a layer that’s lazy and thus easier to use:

# At instantiation, we don't know on what inputs this is going to get called
linear_layer <- layer_linear(units = 32)

# The layer's weights are created dynamically the first time the layer is called
y <- linear_layer(x)

Implementing build() separately as shown above nicely separates creating weights only once from using weights in every call.

Layers are recursively composable

If you assign a Layer instance as an attribute of another Layer, the outer layer will start tracking the weights created by the inner layer.

We recommend creating such sublayers in the initialize() method and leave it to the first call() to trigger building their weights.

MLPBlock <- Layer(
  "MLPBlock",
  initialize = function() {
    super$initialize()
    self$linear_1 <- layer_linear(units = 32)
    self$linear_2 <- layer_linear(units = 32)
    self$linear_3 <- layer_linear(units = 1)
  },
  call = function(inputs) {
    inputs |>
      self$linear_1() |>
      activation_relu() |>
      self$linear_2() |>
      activation_relu() |>
      self$linear_3()
  }
)

mlp <- MLPBlock()
# The first call to the `mlp` will create the weights
y <- mlp(op_ones(shape = c(3, 64)))

cat("weights:", length(mlp$weights), "\n")

## weights: 6

cat("trainable weights:", length(mlp$trainable_weights), "\n")

## trainable weights: 6

Backend-agnostic layers and backend-specific layers

As long as a layer only uses APIs from the ops namespace (ie. using functions starting with op_), (or other Keras namespaces such as activations_*, random_*, or layer_*), then it can be used with any backend – TensorFlow, JAX, or PyTorch.

All layers you’ve seen so far in this guide work with all Keras backends.

The ops namespace gives you access to:

• The NumPy API, e.g. op_matmul, op_sum, op_reshape, op_stack, etc.
• Neural networks-specific APIs such as op_softmax, op_conv, op_binary_crossentropy, op_relu, etc.

You can also use backend-native APIs in your layers (such as tf$nn functions), but if you do this, then your layer will only be usable with the backend in question. For instance, you could write the following JAX-specific layer using jax$numpy:

# keras3::install_keras(backend = c("jax"))
jax <- reticulate::import("jax")

Linear <- new_layer_class(
  ...
  call = function(inputs) {
    jax$numpy$matmul(inputs, self$w) + self$b
  }
)

This would be the equivalent TensorFlow-specific layer:

library(tensorflow)

Linear <- new_layer_class(
  ...
  call = function(inputs) {
    tf$matmul(inputs, self$w) + self$b
  }
)

And this would be the equivalent PyTorch-specific layer:

torch <- reticulate::import("torch")

Linear <- new_layer_class(
  ...
  call = function(inputs) {
    torch$matmul(inputs, self$w) + self$b
  }
)

Because cross-backend compatibility is a tremendously useful property, we strongly recommend that you seek to always make your layers backend-agnostic by leveraging only Keras APIs.

The add_loss() method

When writing the call() method of a layer, you can create loss tensors that you will want to use later, when writing your training loop. This is doable by calling self$add_loss(value):

# A layer that creates an activity regularization loss
layer_activity_regularization <- Layer(
  "ActivityRegularizationLayer",
  initialize = function(rate = 1e-2) {
    self$rate <- as.numeric(rate)
    super$initialize()
  },
  call = function(inputs) {
    self$add_loss(self$rate * op_mean(inputs))
    inputs
  }
)

These losses (including those created by any inner layer) can be retrieved via layer$losses. This property is reset at the start of every call to the top-level layer, so that layer$losses always contains the loss values created during the last forward pass.

layer_outer <- Layer(
  "OuterLayer",
  initialize = function() {
    super$initialize()
    self$activity_reg <- layer_activity_regularization(rate = 1e-2)
  },
  call = function(inputs) {
    self$activity_reg(inputs)
    inputs
  }
)

layer <- layer_outer()
# No losses yet since the layer has never been called
cat("losses:", length(layer$losses), "\n")

## losses: 0

x <- layer(op_zeros(c(1, 1)))
# We created one loss value
cat("losses:", length(layer$losses), "\n")

## losses: 1

# `layer$losses` gets reset at the start of each call
x <- layer(op_zeros(c(1, 1)))
# This is the loss created during the call above
cat("losses:", length(layer$losses), "\n")

## losses: 1

In addition, the loss property also contains regularization losses created for the weights of any inner layer:

layer_outer_with_kernel_regularizer <- Layer(
  "OuterLayerWithKernelRegularizer",
  initialize = function() {
    super$initialize()
    self$dense <- layer_dense(units = 32,
                              kernel_regularizer = regularizer_l2(1e-3))
  },
  call = function(inputs) {
    self$dense(inputs)
  }
)

layer <- layer_outer_with_kernel_regularizer()
x <- layer(op_zeros(c(1, 1)))

# This is `1e-3 * sum(layer$dense$kernel ** 2)`,
# created by the `kernel_regularizer` above.
print(layer$losses)

## [[1]]
## tf.Tensor(0.002025157, shape=(), dtype=float32)

These losses are meant to be taken into account when writing custom training loops.

They also work seamlessly with fit() (they get automatically summed and added to the main loss, if any):

inputs <- keras_input(shape = 3)
outputs <- inputs |> layer_activity_regularization()
model <- keras_model(inputs, outputs)

# If there is a loss passed in `compile`, the regularization
# losses get added to it
model |> compile(optimizer = "adam", loss = "mse")
model |> fit(random_normal(c(2, 3)), random_normal(c(2, 3)), epochs = 1)

## 1/1 - 0s - 120ms/step - loss: 1.8971

# It's also possible not to pass any loss in `compile`,
# since the model already has a loss to minimize, via the `add_loss`
# call during the forward pass!
model |> compile(optimizer = "adam")
model |> fit(random_normal(c(2, 3)), random_normal(c(2, 3)), epochs = 1)

## 1/1 - 0s - 86ms/step - loss: -3.3344e-03

You can optionally enable serialization on your layers

If you need your custom layers to be serializable as part of a Functional model, you can optionally implement a get_config() method:

layer_linear <- Layer(
  "Linear",
  initialize = function(units = 32) {
    self$units <- as.integer(units)
    super$initialize()
  },
  build = function(input_shape) {
    self$w <- self$add_weight(
      shape = shape(tail(input_shape, 1), self$units),
      initializer = "random_normal",
      trainable = TRUE
    )
    self$b <- self$add_weight(
      shape = shape(self$units),
      initializer = "zeros",
      trainable = TRUE
    )
  },
  call = function(inputs) {
    op_matmul(inputs, self$w) + self$b
  },
  get_config = function() {
    list(units = self$units)
  }
)

# Now you can recreate the layer from its config:
layer <- layer_linear(units = 64)
config <- get_config(layer)
str(config)

## List of 1
##  $ units: int 64
##  - attr(*, "__class__")=<class '<r-globalenv>.Linear'>

new_layer <- from_config(config)

Note that the initialize() method of the base Layer class takes some keyword arguments, in particular a name and a dtype. It’s good practice to pass these arguments to the parent class in initialize() and to include them in the layer config:

Linear <- new_layer_class(
  "Linear",
  initialize = function(units = 32, ...) {
    self$units <- as.integer(units)
    super$initialize(...)
  },
  build = function(input_shape) {
    self$w <- self$add_weight(
      shape = shape(tail(input_shape, 1), self$units),
      initializer = "random_normal",
      trainable = TRUE
    )
    self$b <- self$add_weight(
      shape = shape(self$units),
      initializer = "zeros",
      trainable = TRUE
    )
  },
  call = function(inputs) {
    op_matmul(inputs, self$w) + self$b
  },
  get_config = function() {
    list(units = self$units)
  }
)

layer <- Linear(units = 64)
config <- get_config(layer)
str(config)

## List of 1
##  $ units: int 64
##  - attr(*, "__class__")=<class '<r-globalenv>.Linear'>

new_layer <- from_config(config)

If you need more flexibility when deserializing the layer from its config, you can also override the from_config() class method. This is the base implementation of from_config():

Layer(
  ...,
  from_config = function(config) {
    # calling `__class__`() creates a new instance and calls initialize()
    do.call(`__class__`, config)
  }
)

To learn more about serialization and saving, see the complete guide to saving and serializing models.

Privileged training argument in the call() method

Some layers, in particular the BatchNormalization layer and the Dropout layer, have different behaviors during training and inference. For such layers, it is standard practice to expose a training (boolean) argument in the call() method.

By exposing this argument in call(), you enable the built-in training and evaluation loops (e.g. fit()) to correctly use the layer in training and inference.

layer_custom_dropout <- Layer(
  "CustomDropout",
  initialize = function(rate, ...) {
    super$initialize(...)
    self$rate <- rate
    self$seed_generator <- random_seed_generator(1337)
  },
  call = function(inputs, training = NULL) {
    if (isTRUE(training))
      return(random_dropout(inputs, rate = self$rate,
                            seed = self.seed_generator))
    inputs
  }
)

Privileged mask argument in the call() method

The other privileged argument supported by call() is the mask argument.

You will find it in all Keras RNN layers. A mask is a boolean tensor (one boolean value per timestep in the input) used to skip certain input timesteps when processing timeseries data.

Keras will automatically pass the correct mask argument to call() for layers that support it, when a mask is generated by a prior layer. Mask-generating layers are the Embedding layer configured with mask_zero = TRUE, and the Masking layer.

The Model class

In general, you will use the Layer class to define inner computation blocks, and will use the Model class to define the outer model – the object you will train.

For instance, in a ResNet50 model, you would have several ResNet blocks subclassing Layer, and a single Model encompassing the entire ResNet50 network.

The Model class has the same API as Layer, with the following differences:

• It exposes built-in training, evaluation, and prediction loops (fit(), evaluate(), predict()).
• It exposes the list of its inner layers, via the model$layers property.
• It exposes saving and serialization APIs (save(), save_weights()…)

Effectively, the Layer class corresponds to what we refer to in the literature as a “layer” (as in “convolution layer” or “recurrent layer”) or as a “block” (as in “ResNet block” or “Inception block”).

Meanwhile, the Model class corresponds to what is referred to in the literature as a “model” (as in “deep learning model”) or as a “network” (as in “deep neural network”).

So if you’re wondering, “should I use the Layer class or the Model class?”, ask yourself: will I need to call fit() on it? Will I need to call save() on it? If so, go with Model. If not (either because your class is just a block in a bigger system, or because you are writing training & saving code yourself), use Layer.

For instance, we could take our mini-resnet example above, and use it to build a Model that we could train with fit(), and that we could save with save_weights():

ResNet <- Model(
  "ResNet",
  initialize = function(num_classes = 1000, ...) {
    super$initialize(...)
    self$block_1 <- layer_resnet_block()
    self$block_2 <- layer_resnet_block()
    self$global_pool <- layer_global_average_pooling_2d()
    self$classifier <- layer_dense(num_classes)
  },
  call = function(inputs) {
    inputs |>
      self$block_1() |>
      self$block_2() |>
      self$global_pool() |>
      self$classifier()
  }
)

resnet <- ResNet()
dataset <- ...
resnet |> fit(dataset, epochs=10)
resnet |> save_model("filepath.keras")

Putting it all together: an end-to-end example

Here’s what you’ve learned so far:

• A Layer encapsulate a state (created in initialize() or build()) and some computation (defined in call()).
• Layers can be recursively nested to create new, bigger computation blocks.
• Layers are backend-agnostic as long as they only use Keras APIs. You can use backend-native APIs (such as jax$numpy, torch$nn or tf$nn), but then your layer will only be usable with that specific backend.
• Layers can create and track losses (typically regularization losses) via add_loss().
• The outer container, the thing you want to train, is a Model. A Model is just like a Layer, but with added training and serialization utilities.

Let’s put all of these things together into an end-to-end example: we’re going to implement a Variational AutoEncoder (VAE) in a backend-agnostic fashion – so that it runs the same with TensorFlow, JAX, and PyTorch. We’ll train it on MNIST digits.

Our VAE will be a subclass of Model, built as a nested composition of layers that subclass Layer. It will feature a regularization loss (KL divergence).

layer_sampling <- Layer(
  "Sampling",
  initialize = function(...) {
    super$initialize(...)
    self$seed_generator <- random_seed_generator(1337)
  },
  call = function(inputs) {
    c(z_mean, z_log_var) %<-% inputs
    batch <- op_shape(z_mean)[[1]]
    dim <- op_shape(z_mean)[[2]]
    epsilon <- random_normal(shape = c(batch, dim),
                             seed=self$seed_generator)
    z_mean + op_exp(0.5 * z_log_var) * epsilon
  }
)

# Maps MNIST digits to a triplet (z_mean, z_log_var, z).
layer_encoder <- Layer(
  "Encoder",
  initialize = function(latent_dim = 32, intermediate_dim = 64, ...) {
    super$initialize(...)
    self$dense_proj <-
      layer_dense(units = intermediate_dim,  activation = "relu")
    self$dense_mean <- layer_dense(units = latent_dim)
    self$dense_log_var <- layer_dense(units = latent_dim)
    self$sampling <- layer_sampling()
  },
  call = function(inputs) {
    x <- self$dense_proj(inputs)
    z_mean <- self$dense_mean(x)
    z_log_var <- self$dense_log_var(x)
    z <- self$sampling(list(z_mean, z_log_var))
    list(z_mean, z_log_var, z)
  }
)

# Converts z, the encoded digit vector, back into a readable digit.
layer_decoder <- Layer(
  "Decoder",
  initialize = function(original_dim, intermediate_dim = 64, ...) {
    super$initialize(...)
    self$dense_proj <-
      layer_dense(units = intermediate_dim, activation = "relu")
    self$dense_output <-
      layer_dense(units = original_dim, activation = "sigmoid")
  },
  call = function(inputs) {
    x <- self$dense_proj(inputs)
    self$dense_output(x)
  }
)

# Combines the encoder and decoder into an end-to-end model for training.
VariationalAutoEncoder <- Model(
  "VariationalAutoEncoder",

  initialize = function(original_dim, intermediate_dim = 64, latent_dim = 32,
                        name = "autoencoder", ...) {
    super$initialize(name = name, ...)
    self$original_dim <- original_dim
    self$encoder <- layer_encoder(latent_dim = latent_dim,
                            intermediate_dim = intermediate_dim)
    self$decoder <- layer_decoder(original_dim = original_dim,
                            intermediate_dim = intermediate_dim)
  },

  call = function(inputs) {
    c(z_mean, z_log_var, z) %<-% self$encoder(inputs)
    reconstructed <- self$decoder(z)
    # Add KL divergence regularization loss.
    kl_loss <- -0.5 * op_mean(z_log_var - op_square(z_mean) - op_exp(z_log_var) + 1)
    self$add_loss(kl_loss)
    reconstructed
  }
)

Let’s train it on MNIST using the fit() API:

c(c(x_train, .), .) %<-% dataset_mnist()
x_train <- x_train |>
  op_reshape(c(60000, 784)) |>
  op_cast("float32") |>
  op_divide(255)

original_dim <- 784
vae <- VariationalAutoEncoder(
  original_dim = 784,
  intermediate_dim = 64,
  latent_dim = 32
)

optimizer <- optimizer_adam(learning_rate = 1e-3)
vae |> compile(optimizer, loss = loss_mean_squared_error())

vae |> fit(x_train, x_train, epochs = 2, batch_size = 64)

## Epoch 1/2
## 938/938 - 5s - 5ms/step - loss: 0.0748
## Epoch 2/2
## 938/938 - 1s - 777us/step - loss: 0.0676